Date            Version         Changes
===============+===============+=============================================================================================
2008.04.25	1.22		1. Add default config in PG7300.ini: 8051.bin, 4181.img, and WriteAutoInstallImage.

2008.06.10	1.23		1. Regulation body: Add CE for European Union.

2008.06.20	1.24		1. Write Chip ID (0x00-0x01) field after all other fields are configured. (Interim:0xFFFF)
				2. Discard backup part for 8051 and 4181. (Currently 4181 offset: 0x10000, disk image offset: 0x50000.)
				3. Update WhciPgLib.dll to support API for overwriting firmware.
				4. Add "Overwrite FW" button to update instruction RAM for RTU7305.
				Note:	This function is only enabled when "Ctrl+Alt+Shift" are pressed !

2008.06.27	1.25		1. Write PHY settings to 0x6000-0x7FFF if "PhyData.bin" exists.
				2. Add PhyData.bin for WUSB.
				3. Update EEPROM7305.txt for WUSB.

2008.07.14	1.26		1. Update WUSB 7300 SPI bitmap form Justin.

2008.07.25	1.27		1. Update WhciPgLib.dll to support MP mode.
				2. In non-DFU mode, if PG target is HWA, 2nd layout should be enabled for all reg settings, 8051 and 4181.
				3. Add check box to reserve TPC/Vender setting. Default: unchecked.
				Note:	This function is forced enabled in DFU mode.

2008.09.03	1.28		(A temp version for reading version code)

2008.11.19	1.29		1. Read version code.
				2. If verify fail on writing SPI, change ID to 0x0000.
				3. Support WHCI PG in x64 environment.
				4. Modify MP mode and disable some unnecessary MessageBox.

2008.12.19	1.30		1. Add RF chip ID 7016.
				2. Update PhyData.bin.
				3. Update 8051.
				4. Update WhciPgLib.dll for x64 issue.
				5. Let user access "ReserveSetting" check box in DFU mode.
				Note:	If in DFU mode and target is HWA, set it checked as default value.

2009.01.07	1.31		(A temp version for Leyio Project)

2009.01.13	1.32		1. Revise Bandgroup bitmap setting of RF chip 7016.
				2. Support WiNET USB dongle version code reading.
				3. Update PhyData.bin for 7016 setting.

2009.03.18	1.33		1. Update PhyData.bin.
				2. Add Korea regulation, 0x03.
				3. Support customization ID read/write.
				4. Add "Write from image" function.
				5. Change MP mode behavior.
				6. EEPROMXXXX.txt: Set 7012 as default RF Chip ID.
				7. WiNET\PG7300.ini: reserve TPC settings as defalt value.
